Panasonic BB-HCE481A, BB-HCM381A 9. , 10. , 11.

Operating Instructions

129

9. After you confirm the settings and click [Next>], set E-mail notification and

click [Next>].

• If you select [Enable], the E-mail Notification When Triggered page is

displayed. Enter the settings referring to page 127–128.

10. Click [Save] after confirming the settings.

• The new settings are saved.

• When finished, "Success!" is displayed.

11. Click [Go to Trigger page].

• The Trigger page is displayed.

Note

• If you set a short interval when transferring images to a cell phone, many E-

mails will be sent, which may lead to a large phone bill. Therefore, we

recommend you to set a long interval. 1 image per minute frequency is

recommended.

• Motion Detection transfer stops operating until after the camera finishes all

transfers. For example, if the camera transfers 3 images per minute and 6

images in total, Motion Detection will follow the pattern below.

Setting Description

Disable • The camera does not send an E-mail notification when

buffering or transferring images.

Enable • The camera sends an E-mail notification (up to 3

destinations) when buffering or transferring images.

Detectable DetectableUndetectable

1st 2nd 3rd 4th 5th 6th

120 seconds

A Motion Detection signal is detected.

Contents

Main Main Features IPv6*1 Network Camera PoE (Power over Ethernet) Supported (For Only BB-HCE481A [PoE Type]) Audio 2-way Communication*3 (Walkie-talkie Type) Motion Detection Better Image Quality Remote Pan/Tilt/Zoom/Focus Video Output SD Memory Card*1 Recording Enhanced Multi-Camera Page DynamicDNS Service Support Multi-Language Display Abbreviations Trademarks Tab le of Co nte nt s 1 Camera Monitoring....................................................... 8 2 Using the Camera's Basic Features..........................45 3 Registering Users .......................................................88 4 Buffering or Transferring Images..............................96 5 Using Other Features................................................145 6 Camera Maintenance................................................ 154 7 Other Information .....................................................166 8 Index.......................................................................... 196 1 Camera Monitoring 1.1 BB-HCM381A Feature Locations 1.1.1 Front View Indicator Display 1.1.2 Rear View 1.1.3 Bottom View 1.2 BB-HCE481A Feature Locations 1.2.1 Front View Indicator Display 1.2.2 Rear View 1.2.3 Bottom View 1.3 How to Turn on the Camera BB-HCM381A BB-HCE481A 1.4 Accessing the Camera 1. 2. 3. 4. 5. 1.4.1 To Access the Camera in IPv6 IPv6 Domain Name Service What is IPv6? Setting up the IPv6 Router, your PC, and the Camera Setting up the IPv6 Router 1. 2. 3. Setting up the Camera Confirming that You Can Access the Camera 1.5 Viewing the Single Camera page 2. 3. Page Security Warning window If you cannot install ActiveX Controls or you cannot see the video using the Internet Explorer 1.5.1 Displaying the Banner 1.5.2 Auto Centering the Image (Click to Center) 1. 2. 1.5.3 Capturing a Still Image 1.5.4 Using the Operation Bar Page Pan/Tilt Operation Pan Scan/ Tilt Scan Pan/Tilt 1.5.5 Zooming In and Out Using the zoom buttons Clicking the right mouse button (For Only Video) Rotating the mouse wheel (For Only Video) Page 1.5.6 Automatic and Manual Focusing Near button Far button AF (Automatic Focus) button The objects that are difficult to focus on by AF button Page 1.5.7 Setting Home Position/Alarm Position/Preset Posit ion Registering Home Position/Alarm Position Drop-down List 2. 5. Registering a Preset Position 2. 5. 6. Viewing the Image 1. Changing or Deleting the Settings 2. 5. 6. 1.6 Listening to Camera Audio and Talking through the Camera 2. 3. Talk Button Audio Feature Listen Button Page 1.7 Viewing the Multi-Camera page 2. 3. When an image is not displayed on the Multi-Camera page Using the zoom feature on the Multi-Camera page 1.8 Viewing the Buffered Image page 4. Viewer software window Using the zoom feature on the Buffered Image page 1.8.1 Deleting Buffered Images 1.9 Viewing Still Images on Your Cell Phone Page (10) (13) (11) (12) (10) Alarm2 - 1.9.1 Enabling or Disabling the Buffer/Transfer on your Cell Phone 2 Using the Camera's Basic Features 2.1 Setup Page of the Camera 2. Page Page 2.2 Connecting the Camera to Your IPv4 Network 1. 2. Most common mode of setup. Uses a static IP address. Uses ISP DHCP server function. 5. Page Page Page 2.3 Connecting the Camera to Your IPv6 Network 1. 2. Most common mode of setup. Uses a static IP address. 5. Page Page 2.4 What is IPsec? Camera's IPsec Features IPsec Mode Selection Page 2.5 Encrypting the Camera Image in Transport Mode 1. 2. 5. 6. Page 2.6 Encrypting the Camera Image in Tunnel Mode 5. 6. 7. 8. 9. 2.7 Using UPnP (Universal Plug and Play) 1. 2. 4. 2.7.1 Connecting the Camera to a Router that Supports UPnP (IPv4 Only) 3. 2.7.2 Connecting the Camera to a Router that Does Not Support UPnP (IPv4 Only) 1. 2. Port Forwarding feature*1 (IPv4 Only) Port Forwarding feature Page 3. 4. 5. 6. 7. 8. 2. 4. 5. Page 2.8.1 DynamicDNS Service (IPv4/IPv6) Internet 1. 2. 3. 4. 5. 2.9 Setting the Date and Time 1. Page Page 2.10 Changing Camera Settings Page Page Page Page 5. 2.11 Adjusting Audio 1. Page 3 Registering Users 3.1 Changing the Authentication Setting and Administrator User Name and Password IMPORTANT 1. 4. Administrator/General Users/Guest Users 3.2 Logging in to the Camera 3.3 Creating, Modifying or Deleting General Users 1. 2. Page 5. 4 Buffering or Transferring Images 4.1 Procedures of Buffering or Transferring Images 4.2 Buffering or Transferring Images by Timer 2. 3. 5. 6. 7. Page Page Page Page Page 8. 9. 4.3 Buffering or Transferring Images by Alarm Signal 2. 3. Page 5. 6. 7. 8. Page Page Page Page Page 9. 10. 11. Page 4.4 Buffering or Transferring Images by Motion Detection Signal 2. 3. Page 5. 6. 7. 8. Page Page Page Page Page 9. 10. A Motion Detection signal is detected. Detectable DetectableUndetectable 11. Page 4.5 Transferring Camera Images in Transport Mode 4.6 Transferring Camera Images in Tunnel Mode 4.7 Setting the Motion Detection Threshold The Threshold is displayed. Only motion above the Threshold is detected. Page 4.8 Setting Alarm Log Notification Page Page 4.9 Using the SD Memory Card 1. 2. 3. 4. 4.9.1 Format the SD Memory Card 4.9.2 Start the SD Memory Recording 4.9.3 Stop the SD Memory Recording 2. 3. 4. 5 Using Other Features 5.1 Changing Initial Settings on the Single Camera page or the Multi-Camera page 1. Page 4. 5.2 Configuring Multiple Cameras 1. 2. Page 5.3 Specifying Operation Time 1. 2. 3. About Operation Time 5.4 Controlling External Output 1. 2. 3. 5.5 Changing the Indicator Display 1. 2. 4. 6 Camera Maintenance 6.1 Maintenance page Maintenance Page 6.1.3 Confirming Alarm Logs 1. 2. 6.1.4 Restarting the Camera 6.1.5 Updating the Camera Firmware 1. 2. 3. Page 6.1.6 Creating the Configuration File 6.1.7 Loading Settings from a Configuration File 6.1.8 Resetting the Camera to Factory Default 1. 2. 6.2 Support page 6.2.1 The Help page 6.2.2 Product Information 6.2.3 Support Information (1) (2) (3) 6.3 External I/O CAUTION 7 Other Information 7.1 FACTORY DEFAULT RESET Button BB-HCM381A BB-HCE481A FACTORY DEFAULT RESET button (Press the button with a pointed object) 7.2 Default Setting List Basic Page Page Page Page Account Buffer/Transfer Page Advanced Page Page 7.3 Cleaning 7.4 Setting an IP Address on Your PC 7.5 Using Setup Program Finding the camera 1. 2. Page Automatic Setup (Local or Internet Access) or Manual Setup 1. 2. Page Page Page 7.6 Setting Your PC 7.6.1 Setting Proxy Server Settings on a Web Browser How to Set Proxy Server Settings 1. 2. Page Page Page 7.7 ASCII Character Table ASCII Character Table 7.8 File Size and Number of Buffered Images The maximum number of Buffer/Transfer images 7.9 Number of Images on the SD Memory Card Page Page Page Index A B C D T U V Z Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America PQQX15037ZA When you ship the product For product service Copyright: