Operating Instructions
43
Note
• Audio feature does not work on cell phones.
• If the features are not permitted on the General User page (see page 93), the
buttons related with the features are not displayed.
• If the image is not displayed properly, try the following 2 URLs.
• When pan, tilt, or zoom reaches the end, the keypad number and character disappear.
E.g.: The pan reaches the left end.
• Some cell phones are not compatible with Panasonic Network Cameras. Some
phones may allow viewing only on port 80, and some may not support
password authentication. See the Panasonic Network Camera support website
at http://panasonic.co.jp/pcc/products/en/netwkcam/ for a list of cell
phones, and their level of compatibility with the Panasonic Network Camera.
• Some cell phones display images at a decreased size.
• If [Permit access from guest users] or [Permit access from guest users (mobile
only)] is selected, users can access cell phone-specific screens via a cell
phone or PC without the need for authentication.
• Only administrators can operate the Alarm Log and Buffer/Transfer.
(10) Goes to the control page.
(11) Displays the number of new logs.
(12) Displays the date and time, the kind
of signal and sensor.
(13) Goes to the control page.
1. http:// IP address(or URL):Port Number/MobileH for HTML.
(or .viewnetcam.com:50000/MobileH)
2. http:// IP address(or URL):Port Number/MobileX for XHTML.
(or .viewnetcam.com:50000/MobileX)
(10)(13)(11)(12)(10)
Display
A1 R
A2 F
MD
Operation
Alarm1
Alarm2
Motion
Detection
Signal
Rising:
GND to Open (High)
Falling:
Open (High) to GND
-
(4)L(2)U(8) D(6)R
( )Tele (
#
)Wide (2)U(8)D(6) R
( )Tele (
#
)Wide
"(4)L" disappears.