Operating Instructions
30
1.5.7 Setting Home Position/Alarm Position/Preset Posit ion

Registering Home Position/Alarm Position

A home position or 2 alarm po sitions can be registered. When restar ted, the
camera takes a home position. If the Lens Position When Triggered setting is set
for buffering images by alarm (see page 107) or by motion detection (see page
119), the camera moves to the alarm position when triggered.
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without
saving changes.
2. Pan and tilt the camera to a desired
position.
3. Zoom to the desired position.
4. Adjust the focusing if necessary.
5. Select the home position or the
alarm position from the dr op-down
list.
6. Click [Save] to register, or click
[Back] and [Cancel] to cancel.
• If "Success!" is displayed, the
position has been registered
successfully. Click [Back].
Pan/Tilt
Zoom
Focus
Program
Home
Position
Home
Position,
Alarm
Position

Drop-down List