Operating Instructions
133
4.7 Setting the Motion DetectionThe Motion Detection page allows you to adjust the sensitivity of Motion Detection.
Threshold: If the threshold is set low, this function detects nearly all movements.
Sensitivity: If you set sensitivity high, the amplitude of the motion detection bar gets
jumpy.
1. Click [Motion Detection] on t he Setup page.
2. Click the Motion Detection bar in Threshold to set the threshold level.
3. Click the Motion Detection bar in Sensitivity to set the sensitivity level.
4. Click [Save] to save the settings.
• Clicking [Cancel] cancels your settings without saving changes.
5. Click [Go to Motion Detection page].
• The Motion Detection page is displayed.
Note
• The Motion Detection is disabled while zooming, panning and tilting.
Setting Description
Threshold • Adjusts the threshold for Motion D etection. As the
value is set lower, the sensor will detect motions of
smaller changes.
Sensitivity • Adjusts the sensitivity for Motion Detection. As the
value is set higher, the amplitude of the Motion
Detection bar will become greater.