Operating Instructions
21
1.5.2 Auto Centering the Image (Click to Center)
Using your mouse, click any portion of the camera image. As long as it is within the
pan/tilt range of the camera, the image will automatically move to place the
selected point in the center of the screen.
1. Move the cursor to the desired point.
2. Click it.
• The clicked point is centered.
• See page 25 for the pan/tilt operation.
Note
• When End Display appears on the operation bar, Click to Center does not work
beyond the pan/tilt end (see page 23).
• The camera may not center exactly on the clicked point depending on the lens
direction.
• If Click to Center is not permitted on the General User page (see page 93), the
function will not operate.
Cursor