Operating Instructions
147
6.1.6 Creating the Configuration File
A configuration file can be saved on your PC. You can load camera settings from
the configuration file on the Load Settings page (see page 148).
Note
• The saved image contains private information. It is important to prevent leaks
of private information.
1. Click [Save Settings] on the Maintenance page.
2. Click [Save].
3. Click [Save] on the File Download dialog box.
4. Specify the location, and click [Save] on the Save As dialog box.
• The configuration file is saved at that location.
Note
• The file extension (.dat) cannot be changed. If you change it, the settings
cannot be loaded.
• If you try to updating the camera, create a configuration file after updating
the firmware. If there is a firmware version difference between the camera
that you create a configuration file from and the camera that you try to load
settings to, the settings may not have been loaded to the camera.