Operating Instructions
106
4.4 Buffering or Transferring Images by Motion Detection Signal
Camera has a Motion Detection feature that detects movement, such as people,
based on the preset threshold and sensitivity of Camera. You can buffer the
camera images, transfer to an FTP server or send E-mails using the Motion
Detection function as a trigger.
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Note
• The level of motion detection depends on resolution, image quality, and
the object being viewed. Check the level by performing motion detection
recording. (see page 120).
• Enabling Motion Detection delays the frame rate of the camera.
• A change to light or wind conditions may detect motions accidentally.
• Motion Detection may not work in dark areas.
• Objects moving fast may not be detected.
• The Motion Detection is disabled while tilting.
1. Click [Trigger] on the Setup page.
2. Click a No. to enable Trigger.
3. Check [Enable Image Buffer/Transfer], select [Motion Detection] for the
trigger, and click [Next>].
• Click [Delete Buffered Images] to delete images already buffered.