Introduction
Security information
1.With any network connection, security is a concern. The
•Only terminals that are registered to the master adaptor can communicate with the network.
•A terminal may be registered to the master only if the SETUP buttons on the master and terminal are pressed within 5 seconds of each other.
2.Data sent and received over the PLC network employs AES
3.For security, we recommend resetting your adaptors (see page 12) in the following situations.
•If for some reason you are concerned that another adaptor may have been accidentally registered to your master (for example, the adaptor of someone who lives in the same apartment building as you), reset each of your adaptors and register them again.
•If you discard an adaptor, give an adaptor to someone else to use, or have an adaptor serviced, reset the adaptor first.
•If you lose an adaptor, reset each of your adaptors and register them again.
[For assistance, please call: | 5 |