Installation
Connecting adaptors to network devices
Once you have placed the adaptors where you plan to use them and are satisfied with the network speed test results for your terminals (see page 10), follow the procedure below to connect your adaptors to your network devices (broadband router, hub, computer, network printer, network camera, etc.). This will integrate your
1.Confirm that each adaptor’s AC cord is connected to the adaptor and plugged into a wall outlet.
2.Connect a LAN cable (sold separately) to each adaptor’s LAN jack.
To wall outlet
To network device
•The LAN indicator of each adaptor turns green.
•If an adaptor’s LAN indicator does not turn green, see page 13.
3.Connect the other end of each LAN cable to a network device.
•Avoid connecting more than one adaptor to the same hub or router.
You are now ready to use your computers, network printers, network cameras, etc.
[For assistance, please call: | 9 |
