Installation
Placing the adaptors
Refer to the information on page 4 when selecting a location to place your adaptors.
Note
•If you have purchased additional adaptors, make sure you have registered them to the master (see page 7) before placing them where you plan to use them.
1.Connect the AC cord of each adaptor to a wall outlet near where you plan to use it.
2.Confirm that the PLC indicator of each adaptor lights in blue when you plug the adaptors into the wall outlets.
•If the PLC indicators do not light in blue, see page 13.
After you have placed the adaptors where you plan to use them and plugged them into the wall outlets, test the terminal’s network speed (see page 10).
8
