Panasonic BL-PA100A Main unit, PLC Indicator, LAN Indicator, MASTER Indicator, SETUP Button

Introduction

Main unit

	(4)
	(5)
(1)	(6)
(2)	(7)
(3)	(8)

(1)PLC Indicator

Lights to indicate that the adaptor is connected to the HD-PLC network. For more information, see page 11.

(2)LAN Indicator

Lights when a LAN cable is connected to the adaptor, and flashes when data is being sent or received. For more information, see page 11.

(3)MASTER Indicator

Lights when the adaptor is configured as the master. For more information, see page 11.

(4)SETUP Button

Used to register the adaptor (see page 7) or test the terminal’s network speed (see page 10).

(5)Mode Selector

The position of this selector during registration (see page 7) determines whether the adaptor is used as the master or as a terminal.

(6)AC IN

Connects the adaptor to AC power as well as to the HD-PLC network.

(7)FACTORY DEFAULT RESET Button

Used to reset the adaptor and erase its registration (see page 12).

(8)LAN Jack

Connects the adaptor to a network device, such as a broadband router, hub, computer, etc. (see page 9).

6