2. Cabling
Connecting to Power
The BitStorm 2600 can be powered by any AC power source supplying
Procedure
To connect the BitStorm 2600 to a power source:
1. Insert the supplied power cord into the power socket on the back of the unit.
2.If the BitStorm 2600 is in a rack, dress the power cord to the left and fasten it to the rail with a cable tie.
3.Connect the other end of the power cord to a grounded AC power source.
4.Make sure the STATUS LED on the front panel is ON (green). See Chapter 3, LEDs.
March 2005 |
