Paradyne manual Installing the BitStorm 2600 Into a Rack

1. Installation

Installing the BitStorm 2600 Into a Rack

Two types of mounting screws are provided. Use:

„#10-32 mounting screws for rails with threaded screw holes

„#12-24 mounting screws and self-retaining nuts for rails with unthreaded screw holes

Procedure

To install the BitStorm 2600 into a rack:

1.Determine where in the rack you will mount the BitStorm 2600. If your rack does not have threaded screw holes, slip self-retaining nuts onto the rails where the BitStorm 2600 will be fastened.

02-17070

2.Place the unit so that the brackets rest against the front of the rails. Insert screws in the bottom screw positions and hand-tighten them.

1-8 March 2005 2600-A2-GN20-40