Paradyne BitStorm 2600 manual Configure Management Inband Address

4. Configuration

Configure Management Inband Address

The configure management inband address command specifies the IP address of the unit.

configure management inband address {ip_address} { subnet_mask}

Minimum Access Level: Administrator

ip_address – Specifies the management IP address. Default is 0.0.0.0 (disabled). Do not configure inband and out-of-band management on the same subnet.

subnet_mask – Specifies the subnet mask to be applied to the IP address. The default mask is 255.255.255.0.

Example:

PDYN# configure management inband address 137.90.127.3 255.255.255.0

Configure Management Out-of-Band Address

The configure management out-of-band address command specifies the IP address of the unit that will accept management traffic on the out-of-band management port.

configure management out-of-band address {bootp {{ip_address} { subnet_mask} }

Minimum Access Level: Administrator

bootp – Specifies that a BOOTP server will determine the management IP address. ip_address – Specifies the management IP address. The default address is

10.10.10.10.Do not configure inband and out-of-band management on the same

subnet.

subnet_mask – Specifies the subnet mask to be applied to the IP address. The default mask is 255.255.255.0.

Example:

PDYN# configure management out-of-band address bootp

PDYN# configure management out-of-band address 137.90.127.3 255.255.255.0

2600-A2-GN20-40 March 2005 4-3