Paradyne BitStorm 2600 manual Management Port

2. Cabling

Management Port

Port 1 can be used to connect the BitStorm 2600 to a network management system using a 10BaseT or 100BaseT LAN. A straight-through cable can be used regardless of the destination interface, since the port automatically distinguishes between an MDI and an MDIX.

Procedure

To use Port 1 as the out-of-band management port:

1.Connect an 8-position modular cable to Port 1.

2.If the BitStorm 2600 is in a rack, fasten the cable to a rail with a cable tie.

3.Connect the other end of the cable to your Ethernet switch or a network interface card in a PC.

Ethernet Switch

PORT1-
10/100BT PORT2-
10/100BT	1000BT
		PORT3
		K	T
		LIN	A
			C
CONSOLE	ALARM

Port 1

GigE
S
U	M
T	R	T
TA
	A	ES
S	AL
		T

1	3	5	7
2	4			9	11	13
		6	8				15	17
				10	12				19	21
						14	16				23
								18	20	22	24

DSL PORTS 1-24

04-17521

2600-A2-GN20-40 March 2005 2-7