Main Menu (continued)
MARKER
|
|
|
| Underlined values indicate factory defaults. | ||
|
|
|
|
|
| |
Sub menu | Setting | Description |
|
|
| |
|
|
|
|
| ||
MARKER | OFF*1 | Enables the MARKER setting. |
|
| ||
| ON |
|
|
|
|
|
|
|
| ||||
16:9*2*3 | OFF | Selects and displays marker type for 16:9 aspect ratio. | ||||
| 4:3 | <OFF> | No marker display |
|
| |
| 13:9 | <4:3> | 4:3 marker | <13:9> | 13:9 marker | |
| 14:9 | <14:9> | 14:9 marker | <CNSCO> CNSCO marker | ||
| CNSCO | <VISTA> | VISTA marker | <95%> | 95% area marker | |
| VISTA | <90%> | 90% area marker | <80%> | 80% area marker | |
| 95% | <93%> | 93.1% area marker (TYPE1) |
|
| |
| 93% |
| 93% area marker (TYPE2) |
|
| |
| 90% | <88%> | 89.5% area marker (TYPE1) |
|
| |
| 88% |
| 88% area marker (TYPE2) |
|
| |
| 80% |
|
|
|
|
|
|
|
| ||||
4:3*2*4 | OFF | Selects and displays marker type for 4:3 aspect ratio. | ||||
| 95% | <OFF> | No marker display |
|
| |
| 93% | <95%> | 95% area marker | <93%> | 93% area marker | |
| 90% | <90%> | 90% area marker | <80%> | 80% area marker | |
| 88% | <88%> | 89% area marker (TYPE1) |
|
| |
| 80% |
| 88% area marker (TYPE2) |
|
| |
|
|
| ||||
BACK*2 | NORMAL | Selects the background brightness around the marker. | ||||
| HALF | <NORMAL> | Normal background |
|
| |
| BLACK | <HALF> |
| 50% background brightness |
| |
|
| <BLACK> |
| 0% background brightness (black) |
| |
|
|
|
|
| ||
CENTER*2 | OFF | Displays the center marker. |
|
| ||
| ON | <OFF> |
| Turns the display off |
|
|
|
| <ON> |
| Turns the display on |
|
|
|
|
| ||||
GPI PRESET1*5 | 4:3 | GPI PRESET1: Selects the marker displayed by the GPI terminal | ||||
| 13:9 | “MARKER1 ON/OFF” (J page 36) operation. |
| |||
| 14:9 | GPI PRESET2: Selects the marker displayed by the GPI terminal | ||||
| CNSCO | “MARKER2 ON/OFF” (J page 36) operation. |
| |||
| VISTA | <4:3> |
| 4:3 marker |
|
|
| 95% (16:9) | <13:9> |
| 13:9 marker |
|
|
GPI PRESET2*5 |
|
|
| |||
| 93% (16:9) | <14:9> |
| 14:9 marker |
|
|
| 90% (16:9) | <CNSCO> | CNSCO marker |
|
| |
| 88% (16:9) | <VISTA> |
| VISTA marker |
|
|
| 80% (16:9) | <95% (16:9)> | 95% area marker for 16:9 aspect ratio | |||
| 95% (4:3) | <93% (16:9)> | 93% area marker for 16:9 aspect ratio | |||
| 93% (4:3) | <90% (16:9)> | 90% area marker for 16:9 aspect ratio | |||
| 90% (4:3) | <88% (16:9)> | 88% area marker for 16:9 aspect ratio | |||
| 88% (4:3) | <80% (16:9)> | 80% area marker for 16:9 aspect ratio | |||
| 80% (4:3) | <95% (4:3)> | 95% area marker for 4:3 aspect ratio | |||
|
| <93% (4:3)> | 93% area marker for 4:3 aspect ratio | |||
|
| <90% (4:3)> | 90% area marker for 4:3 aspect ratio | |||
|
| <88% (4:3)> | 88% area marker for 4:3 aspect ratio | |||
|
| <80% (4:3)> | 80% area marker for 4:3 aspect ratio | |||
|
|
| ||||
MARKER TYPE*6 | TYPE1 | Selects conventional monitor or camera recorder marker size. | ||||
| TYPE2 | <TYPE1> |
| Conventional monitor marker size |
| |
|
| <TYPE2> |
| Marker size compliant with the camera recorder (Panasonic) | ||
|
|
| ||||
CROSS HATCH | HIGH | Turns the cross hatch grid on and off and sets its density. | ||||
| LOW | <HIGH> |
| 70/256 (displays a dense cross hatch grid) | ||
| OFF | <LOW> |
| 20/256 (displays a light cross hatch grid) | ||
|
| <OFF> |
| Turns the display off |
|
|
|
|
|
|
|
|
|
*1 This setting is turned “ON” when receiving marker control in REMOTE operation. (GPI, if set, has priority.)
*2 These settings are disabled when the GPI function (J page 36) is used to control the marker setting. They are also disabled in split screen mode.
*3 This setting is enabled only for HD and SD signal input in 16:9 aspect ratio mode.
*4 This setting is enabled for SD signal input in 4:3 aspect ratio mode.
*5 Remote control via
*6 Display size for SD signals differ.
TYPE1: The effective horizontal area meets the SMPTE125M for NTSC and
TYPE2: The effective horizontal area meets the
18