Main Menu (continued)

•PART

Resizes the main window to show only its center to also display a second image (two sub-windows).

Press the FUNCTION button to which the SUB WINDOW function has been assigned.

Normal window

Before image input

After image input

(main window)

(two sub-windows)

(two sub-windows)

Press the

 

Press the

button again

 

button again

Video

Crops the image to show its center part

Video

Video

 

Still image

Video

 

 

 

 

 

The cropped main window image is placed side by side with a second image

These examples show 16:9 aspect ratio images.

Note on FULL/PART selection

This function is designed to enable comparison of identical formats input to the same input terminal. Input of different formats via different input channels may distort the sub-window (left side, still image) or blanking could occur. However, input of an identical format signal to the input terminal during still image acquisition will display correctly.

■“WFM/VECTOR”

The “WFM/VECTOR” function enables display of the waveform and vector display. Use “DISPLAY SETUP” in the main menu to select “WFM” and “VECTOR” display. (J page 33)

Press the button ([FUNCTION1] to [FUNCTION5] (J page 23)) to which the “WFM/VECTOR” function has been assigned to turn the function on and off. (This assumes that the “WFM/VECTOR” function has been assigned to any of the [FUNCTION1] to [FUNCTION5] buttons.)

Press the FUNCTION button to which the WFM/VECTOR function has been assigned.

Normal screen

WFM display

VECTOR display*1

Press the

 

Press the

button again

 

button again

WFM (waveform display)

VECTOR

 

(vector display)

 

These examples show 16:9 aspect ratio images.

*1 Displayed only for SDI signal input.

26