Panasonic BT-LH1760E, BT-LH1760P SCAN, MONO, MARKER, Setting, HV DELAY, TIMECODE, SD ASPECT, AUTO SETUP, SUB WINDOW, WFM/VECTOR, LEVEL METER, GAMMA SELECT, PIXEL TO PIXEL

Main Menu (continued)

■FUNCTION setting restrictions

Settings are not available under the following conditions.

Setting	Conditions that disable operation
HV DELAY	During SUB WINDOW, WFM, PIXEL TO PIXEL mode operation, “INVALID FUNCTION”
	appears to indicate that operation is disabled.
	When “RGB-COMP.” is selected under “YPBPR/RGB” or “DVI-COMP.” is selected under
	“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate that
	operation is disabled.
AUTO SETUP	When something other than “RGB-COMP.” is selected under “YPBPR/RGB” in the “INPUT
	SELECT” menu, “NOT RGB-COMP. CH” appears to indicate that operation is disabled.
	When “RGB-COMP.” is selected under “YPBPR/RGB” in the “INPUT SELECT” menu and
	no signal is input, “INCOMPLETE” appears to indicate that operation is disabled.
GAMMA SELECT	When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.
	When “RGB-COMP.” is selected under “YPBPR/RGB” or “DVI-COMP.” is selected under
	“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate that
	operation is disabled.
SD ASPECT	When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.
	During SUB WINDOW (still image) and HD display (including PIXEL TO PIXEL), “INVALID
	FUNCTION” appears to indicate that operation is disabled.
SCAN	When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.
	During SUB WINDOW and PIXEL TO PIXEL mode operation, “INVALID FUNCTION”
	appears to indicate that operation is disabled.
SUB WINDOW	When “RGB-COMP.” is selected under “YPBPR/RGB” or “DVI-COMP.” is selected under
	“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate that
	operation is disabled.
	If you select “RGB-COMP.” or “DVI-COMP.” while motion picture is displayed in sub-
	window, the screen returns to a single screen display. Selecting something other than
	“RGB-COMP.” or “DVI-COMP.” opens the split screen mode and a still image is blacked
	out.
WFM/VECTOR	During SUB WINDOW and PIXEL TO PIXEL mode operation, “INVALID FUNCTION”
	appears to indicate that operation is disabled.
	When “RGB-COMP.” or “RGB-VIDEO” is selected under “YPBPR/RGB”, or “DVI-COMP.” or
	“DVI-VIDEO” is selected under “DVI-D” in the “INPUT SELECT” menu, “INVALID
	FUNCTION” appears to indicate that WFM operation is disabled.
	1080/23P, 24P, 25P, 29P or 30P input causes “INVALID FUNCTION” to appear indicating
	that operation is disabled,
	VECTOR does not appear when a selection other than “SDI” is made in the “INPUT
	SELECT” menu.
MARKER	When “RGB-COMP.” is selected under “YPBPR/RGB” or “DVI-COMP.” is selected under
	“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate that
	operation is disabled.
	When GPI is set during sub-window operation, “INVALID FUNCTION” appears to indicate
	that operation is disabled.
PIXEL TO PIXEL	When “SD1” or “SD2” is selected in the “INPUT SELECT” menu during 1080I/P signal
	input or “YPBPR” is selected in “YPBPR/RGB”, 1080I/P signal input is enabled. When other
	settings are made, “INVALID FUNCTION” appears to indicate that operation is disabled. In
	SUB WINDOW mode, “INVALID FUNCTION” appears to indicate that operation is
	disabled.
LEVEL METER	When input is something other than SDI, “INVALID FUNCTION” appears to indicate that
	operation is disabled.
MONO	When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.
TIMECODE	When input is something other than HD-SDI input, “INVALID FUNCTION” appears to
	indicate that operation is disabled.

24