Panasonic BT-LH1760E, BT-LH1760P •FULL, • SCAN, • MONO, • MARKER, • HV DELAY, • AUTOSETUP, • BLUE ONLY, • SD ASPECT, • TIME CODE, ■“HV DELAY”, • SUB WINDOW, • WFM/VECTOR, • CROSS HATCH

Main Menu (continued)

■Functions displayed during FUNCTION button operation

Pressing any of the [FUNCTION1] to [FUNCTION5] buttons displays the operations assigned to each button as shown below.

• HV DELAY	• MARKER
DELAY OFF/V DELAY/H DELAY/HV DELAY	MARKER OFF/4:3 MARKER/13:9 MARKER/14:9
• AUTOSETUP	MARKER/VISTA MARKER/CNSCO MARKER/95%
AUTOSETUP/COMPLETE/INCOMPLETE/NOT	MARKER/93% MARKER/90% MARKER/88%
RGB-COMP.CH	MARKER/80% MARKER/MARKER ON
• BLUE ONLY	• PIXEL TO PIXEL
BLUE ONLY ON/BLUE ONLY OFF	• PIXEL POSITION
• GAMMA SELECT	CENTER/LEFT TOP/LEFT BOTTOM/RIGHT TOP/
GAMMA STANDARD/GAMMA FILM/GAMMA	RIGHT BOTTOM/PIXEL TO PIXEL OFF
STDIO/PST	• AUDIO LEVEL METER
• SD ASPECT	METER OFF/METER 2CH/METER 4CH/METER
4:3/16:9	8CH
• SCAN	• CROSS HATCH
NORMAL SCAN/UNDER SCAN	CROSS HATCH HIGH/CROSS HATCH LOW/
• SUB WINDOW	CROSS HATCH OFF
SINGLE/FULL/PART/STILL	• MONO
• WFM/VECTOR	MONO ON/MONO OFF
WFM ON/WFM/VECTOR OFF/VECTOR × 1/	• TIME CODE
VECTOR × 2/VECTOR × 4/VECTOR × 8	LTC/VITC/LUB/VUB/TC OFF
	• CLOSED CAPTION
	CC1/CC2/CC3/CC4/CC OFF

■“HV DELAY”

This displays the blanking period. Each press of the button changes the display as follows: H blanking display J V blanking display J H and V blanking display J no blanking display.

■“SUB WINDOW”

Opening the “SUB WINDOW” function splits the screen (main window) in two as shown below to enable

comparison of a recorded still image with live video.

Use the “SUB WINDOW” setting (FULL, PART) in the “SYSTEM CONFIG” menu (J page 22) to set up the

function as shown below.

Press the button ([FUNCTION1] to [FUNCTION5] (J page 23)) to which the “SUB WINDOW” function has been assigned to turn the function on and off. (This assumes that the “SUB WINDOW” function has been assigned to any of the [FUNCTION1] to [FUNCTION5] buttons.)

To setup “IP MODE” (J page 20), exit the “SUB WINDOW” function first.

•FULL

Resizes the main window to also display a second window (two sub-windows).

Press the FUNCTION button to which the SUB WINDOW function has been assigned.

Normal window		Before image input		After image input
(main window)		(two sub-windows)		(two sub-windows)
	Press the		Press the
	Press the		Press the
	button again		button again

Video

Still image

Video