REMOTE Specifications
REMOTE operation is possible on this monitor using the
GPI terminal
Each of the items in the GPI screen are compatible with the following terminals. You can assign functions to each terminal in the menu GPI screen (J page 26).
The functions assigned to each terminal operate when the GND (5 Pin) is connected (ON) or open (OFF).
Operating conditions
| Pin number | Signal | g |
| Level operation: operates when GND is connected. | ||
|
|
| |
| 1 | GPI1 | |
| Edge operation: operates when GND changes from | ||
|
|
| |
| 2 | GPI2 | |
| open to connected. | ||
GPI Terminal (9P) | 3 | GPI3 | • If you have assigned a level operation function to |
|
|
| more than one terminal, the function operates as long |
| 4 | GPI4 | |
|
|
| as one of the terminals is connected. |
| 5 | GND | |
|
| ||
|
|
|
|
| 6 | GPI5 |
|
|
|
|
|
| 7 | GPI6 |
|
|
|
|
|
| 8 | GPI7 |
|
|
|
|
|
| 9 | GPI8 |
|
Assignment items | Function | Operating conditions |
|
|
|
UNDEF | No settings (no terminal assignment functions) | — |
|
|
|
MARKER1 | Switches the marker display of the marker decided in | Level operation |
ON/OFF*1 | “GPI PRESET1” (J page 17) in the “MARKER” menu. | (Connected: ON, Open: OFF) |
MARKER2 | Switches the marker display of the marker decided in | Level operation |
ON/OFF*1 | “GPI PRESET2” (J page 17) in the “MARKER” menu. | (Connected: ON, Open: OFF) |
MARKER | Reduces the brightness of the background outside the | Level operation |
BACK HALF*2 | marker displayed in “GPI PRESET1” (J page 17) by 50%. | (Connected: ON, Open: OFF) |
MARKER | Reduces the brightness of the background outside the | Level operation |
BACK BLACK*2 | marker displayed in “GPI PRESET1” (J page 17) to 0%. | (Connected: ON, Open: OFF) |
CENTER MARKER | Switches the center marker display ON/OFF. | Level operation |
| (When other markers are being displayed, this is | (Connected: ON, Open: OFF) |
| superimposed on the other markers) |
|
INPUT SEL. VIDEO | Switches the input system to VIDEO. | Edge operation |
|
|
|
INPUT SEL. Y/C | Switches the input system to Y/C. | Edge operation |
|
|
|
INPUT SEL. SDI1 | Switches the input system to SDI1. | Edge operation |
|
|
|
INPUT SEL. SDI2 | Switches the input system to SDI2. | Edge operation |
|
|
|
INPUT SEL. | Switches the input system to YPBPR/RGB. | Edge operation |
YPBPR/RGB |
|
|
SD ASPECT | Sets the aspect ratio settings when using SD signal | Level operation |
| input. (Disabled when using HD signal and PC signal) | (Connected: 16:9, Open: 4:3) |
SCAN | You can switch the scan mode between “UNDER” | Level operation (Connected: UNDER, |
| and “NORMAL”. (Disabled when using PC signal) | Open: NORMAL) |
| Lights the red tally. | Level operation |
|
| (Connected: ON, Open: OFF) |
| Lights the green tally. | Level operation |
|
| (Connected: ON, Open: OFF) |
MONO | Switches between color and monochrome | Level operation (Connected: |
| (MONO). (Disabled when using PC signal) | Monochrome, Open: Color) |
|
|
|
GAMMA SEL. FILM | Used to switch the gamma characteristic to the | Level operation (Connected: FILM |
| FILM mode. | mode, Open: STANDARD mode) |
|
|
|
GAMMA SEL. | Used to switch the gamma characteristic to the | Level operation (Connected: STDIO/ |
STDIO/PST | STDIO/PST mode. | PST mode, Open: STANDARD mode) |
|
|
|
RGB SYNC*4 | Used to select SYNC at the time of | Level operation |
| input. | (Connected: EXT, Open: |
*1 When the 16:9 marker and 4:3 marker are simultaneously selected and activated on the 16:9 aspect display, both markers are displayed. *2 When the 16:9 marker and 4:3 marker are simultaneously displayed, the background selected with the 16:9 marker is controlled.
*3 When both
*4 This is only enabled when
30