Main Menu (continued)
FUNCTION
|
| The underlined values are factory preset setting values. |
|
|
|
Sub menu | Settings | Explanation |
|
|
|
FUNCTION 1 – | <HV DELAY> | Used to select the functions to be assigned to individual |
FUNCTION 5 | <AUTOSETUP> | buttons [FUNCTION1] to [FUNCTION5] |
| <BLUE ONLY> | <HV DELAY> |
| <GAMMA SELECT> | Displays the synchronizing signal (horizontal, vertical). |
| <SD ASPECT> | The display is switched in the following order. |
| <SCAN> | DELAY OFF J V DELAY J H DELAY J HV DELAY J |
| <SUB WINDOW> | DELAY OFF |
| <WFM> | <AUTOSETUP> |
| Used to automatically adjust the PC display. | |
| <MARKER> | |
| <BLUE ONLY> | |
| <PIXEL TO PIXEL> | |
| Used to cut the red and green signals. You can check the hue | |
| <PIXEL POS.> | |
| (PHASE) and depth of color (CHROMA). This is switched | |
| <LEVEL METER> | |
| between ON/OFF by pushing the button. | |
| <MONO> | |
| <GAMMA SELECT> | |
| <UNDEF> | |
| Used to display the gamma curve. | |
|
| |
|
| The display changes in the following order. |
|
| GAMMA STANDARD J GAMMA FILM J |
|
| GAMMA STDIO/PST J GAMMA STANDARD |
|
| <SD ASPECT> |
|
| Used to switch between “16:9” and “4:3”.*1 |
| (Factory preset | <SCAN> |
| You can switch between “UNDER SCAN” and “NORMAL | |
| settings | |
| SCAN”.*1 | |
| FUNCTION1: | <SUB WINDOW> |
| MARKER | |
| You can perform the settings for 2 screen display mode.*1 | |
| FUNCTION2: | The display changes in the following order. |
| WFM | |
| SINGLE J FULL/PARTJ STILLJ SINGLE | |
| FUNCTION3: | |
| <WFM> | |
| LEVEL METER | |
| Used to display the wave form monitor. | |
| FUNCTION4: | |
| <MARKER> | |
| PIXEL TO PIXEL | |
| Used to switch the marker on and off. | |
| FUNCTION5: | |
| <PIXEL TO PIXEL> | |
| PIXEL POS.) | |
| Used to switch the display between the input size and display | |
|
| |
|
| size. |
|
| <PIXEL POS.> |
|
| Used to set the signal display position when PIXEL TO PIXEL |
|
| is on. |
|
| <LEVEL METER> |
|
| Used to switch the AUDIOMETER display. |
|
| The display changes in the following order. |
|
| METER 8CH J METER 4CH J METER 2CH J OFFJ |
|
| METER 8CH |
|
| <MONO> |
|
| Used to switch the display between color and |
|
| white. |
|
| <UNDEF> |
|
| No settings |
|
|
|
FUNCTION DISPLAY | <ON> | Used to make display settings for the functions assigned to |
| <OFF> | individual buttons [FUNCTION1] to [FUNCTION5] (front- |
|
| panel buttons). |
|
| <ON> |
|
| The selected function is displayed. |
|
| <OFF> |
|
| The selected function is not displayed. |
|
|
|
*1 If these settings are changed, the menu settings will also change.
22
