29
Troubleshooting
Some applications do not
work properly
Fast User Switching Function
When switching to a different user with the Fast User Switching function, the following
problems may occur.
• Some applications may not work properly.
•Key combinations with Fn may not work.
• It may not be possible to set the settings of the display.
• A serial mouse may not work.
• The B’s CLiP icon will no longer be shown on the taskbar and CD-RW disc cannot be
written using B’s CLiP.
• <Only for models with wireless LAN>
Wireless LAN may not work.
In this case, log off all users without using Fast User Switching function, and try the
operation once more. If the problem persists, restart the computer.
Press Ctrl + Shift + Esc to open Task Manager and close the software application
which is not responding.
Is there an input screen hidden behind another window? Use Alt + Tab to check for
other windows being displayed.
After shutting down by pressing the power switch for more than four seconds, press the
power switch to power on and open the application again.
If the program no longer works normally, delete the program using the following menu.
Then reinstall the program.
[start] - [Control Panel] - [Add or Remove Programs]
Others
No response
SD Memory Card
Cannot log on with the SD
Memory Card
Windows logon user name and password are not set in the SD Memory Card correctly.
Enter the Windows user name and password without using the SD Memory Card.
After logging on, set the same user name and the password on the SD Memory Card and
Windows, using the following operation.
• Change the setting of the SD Memory Card by [SD Card Setup] ( “SD Memory
Card Security Function”)