Panasonic CF-T2 Series Setting the User Password (enabling, changing, disabling)

31
Security Measures
NOTE
zWhen the Supervisor Password has not been set, the User Password can not be set.
Set the Supervisor Password if you have not done so. (Îpage 29)
zTo disable the User Password, start up the Setup Utility with the Supervisor Password.
1Run the Setup Utility. (Îpage 79)
2Using either Î or Í, select [Security].
3Using either Ï or Ð, select [Set User Password] and press Enter .
4Only when the User Password has been set:
Enter your password at [Enter Current Password] and press Enter .
5Enter your password at [Enter New Password] and press Enter .
zTo disable the User Password
Press only
Enter .
6Re-enter your password at [Confirm New Password] and press
Enter .
zTo disable the User Password
Press only
Enter .
7At [Setup Notice], press Enter .
8Press F10 and select [Yes], then press Enter .
CAUTION
zDo not forget your password. If a password is forgotten, you will be unable to use your
computer. If this happens, ask a person who knows the Supervisor Password.
zWhen running the Setup Utility, do not leave your computer even for a short time, as
the possibility exists for the password to be set/changed by another person.
Setting the User Password (enabling, changing, disabling)