37
E
1
Select [MeiWDS Setup Utility] in the following proce-
dure.
Windows XP [start] - [All Programs] - [Panasonic]
Windows 2000 [Start] - [Programs] - [Panasonic]
2
Enter the Supervisor Password, then select [OK].
In the default setting, the Supervisor Password is set to
“supervisor”.
3
Set the password and AES Encryption settings, then se-
lect [Next].
If the setting between the computer and wireless dis-
play does not confirm (e.g., the display has changed to
another one.), set it again in the following procedure.
Set AES Key Length.
<When setting AES Encryption to something other than
[Disable]>
Select [AES Key], and set the AES Key(s) using phrase
or binary, then select [OK].
Set AES Key Lifetime.
4
On the confirmation screen, select [Finish].
On the confirmation screen, select [OK] and then restart
the computer.
The MeiWDS and the wireless display cannot simul-
taneously make settings.
Set the AES Key setting after setting the wireless dis-
play. ( page 35)
When selecting on the taskbar, the menu is dis-
played.
[Password] and [Exit MeiWDS] are enabled when
adding the check mark for [Enable tray menu] in the
MeiWDS Setup Utility.
·Password : Set the same password as that is
set in [Option] menu.
·About MeiWDS: The software version and copy-
right are displayed.
·Exit MeiWDS : Exit the program.
NOTE
MeiWDS Setup Utility