Panasonic CF-W5 6Press F10, Maintenance, Select the [Security] menu, then select [Computrace (R), 3Select [Computrace (R) BIOS Module], and set to [Enable]

NOTE

zConsult Absolute Software Corp. before disposal.

zRefer to the following URL for Computrace® software for installation and available service regions. Note that this service is only available in certain regions.

http://www.absolute.com

1 Turn on or restart the computer, and press F2 while [Panasonic] boot screen is dis- played.

The Setup Utility starts up.

zIf the password is requested, enter the Supervisor Password.

2Select the [Security] menu, then select [Computrace (R) Sub-Menu] and press Enter.

3Select [Computrace (R) BIOS Module], and set to [Enable].4At the confirmation message, select [Execute] and press Enter.5At the reconfirmation message, select [Execute] and press Enter.6Press F10.

At the confirmation message, select [Yes] and press Enter.

The computer restarts.

Maintenance

To clean the LCD panel and touch pad

Wipe lightly with a gauze or other dry, soft cloth.

To clean areas other than the LCD panel and touch pad

Wet a soft cloth with water or a diluted kitchen cleanser (neutral), wring the cloth out thoroughly, and wipe the dirty area gently. Using a detergent other than a neutral kitchen cleanser (e.g., a weak alkali cleanser) may adversely affect painted surfaces

CAUTION

zDo not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc. Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.

zDo not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause malfunction or damage.

Appendix Troubleshooting Useful Information Getting Started

17