17
Preparations
4Open the display.
APress and hold the latch (B) located at the front.
BLift open the display.
zDo not open the display wider than necessary (170° or more), and do
not apply excessive pressure to the LCD. Do not open or close the
computer holding the edge of the LCD segment. Hold the C (below)
segment to open or close the computer.
5Connect your computer to a power outlet.
zBe sure the AC adaptor is connected until completing the first-time use
operation.
zThe battery pack will be charged automatically.
Charging Time: Approx. 5 hours (Power off), Approx. 6.5 hours (Power on)
(Varies depending on the usage conditions.)
zWhen using the computer for the first time, do not connect any peripheral
device except the battery pack and AC adaptor to the computer.
CAUTION
Handling the AC adaptor
zDo not subject the AC adaptor to any strong impact.
Using the AC adaptor after a strong impact such as being dropped may result in
electrocution, short circuit, or fire.
zUse only the specified AC adaptor with your computer. Using an AC adaptor
other than the one supplied might damage the battery and/or the computer.
zProblems such as sudden voltage drops may arise during periods of thunder
and lightning. Since this could adversely affect your computer, an uninterrupt-
ible power source (UPS) is highly recommended unless running from the battery
pack alone.
6Turn your computer on.
zSlide the power switch and hold it for approximately one second until
the power indicator turns on before releasing it.
CAUTION
zDo not slide the power switch and hold it for more than four seconds; this will
cause the power to be turned off forcibly.
zDo not slide the power switch repeatedly.
zDo not press any keys or touch the touch pad until [Windows XP Professional
Setup] is displayed.
zDo not change the Setup Utility until completing step 7. If you do so, Windows
setup may not operate properly.