51
Troubleshooting
1Connect the AC adaptor.
Do not interrupt the reinstallation procedure before completion, for example
by turning off the computer or pressing the
Ctrl
+
Alt
+
Del
key, as this
may prevent Windows from starting up, or may cause data to be lost so that
the reinstallation procedure cannot be executed.
2Change the settings in the Setup Utility.
Make the following settings.
zReturn settings to the status at the time of purchase.
zChange settings to enable startup from DVD-ROM & CD-R/RW drive.
If you change the settings from that at the time of purchase, we recommend
that you make a note of the settings that are changed.
ATurn on the computer, and press the
F2
key while [Panasonic] boot
screen is displayed.
The Setup Utility will start up.
zIf the password has been set, enter the Supervisor Password, and
press the
Enter
key.
BPress the
F9
key.
At the confirmation message, select [Yes] and press the
Enter
key.
CSelect the [Boot] menu, then select [USB CDD] and press the
F6
key until
[USB CDD] is at the top of [Boot priority order].
DPlace the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW
drive.
zWhen the disk cover does not open:
[CD/DVD Drive Power] has been set to [Off] in the [Main] menu. Per-
form the following procedure.
Press the
F10
key. At the confirmation message, select [Yes] and
press the
Enter
key. (The computer will restart)
Press the
F2
key while [Panasonic] boot screen is displayed.
Place the Product Recovery DVD-ROM, and execute step E.
EPress the
F10
key.
At the confirmation message, select [Yes] and press the
Enter
key.
The Setup Utility will close, and the computer will restart.
zIf the password has been set, enter the Supervisor Password, and
press the
Enter
key.
3Use the Product Recovery DVD-ROM to execute reinstalla-

tion.

APress the
1
key to execute [1. [Recovery]].
(All of the screens below are only examples.)
Reinstalling