61
Important Information
Set the Product Recovery DVD-ROM, and execute step D.
DPress the
F10
key.
At the confirmation message, select [Yes] and press the
Enter
key.
The Setup Utility will close, and the computer will restart.
If [Enter Password] is displayed during the following procedure, enter the
Supervisor Password or User Password.
<When the hard disk backup function has been enabled>
When the message [The Backup function has been enabled...] appears,
press the
Y
key.
EWhen the message "Select a number" is displayed, press the
2
key and
perform [2. [Erase HDD]].
(You can cancel this operation by pressing the
0
key.)
The confirmation message will be displayed.
<When the hard disk backup function has been enabled>
When the message [The Backup function has been enabled...] appears,
press the
Y
key.
When the message [Computer must be rebooted in order to execute
[Erase HDD]] appears, press the
R
key.
FPress the
Y
key.
Hard Disk Data Erase Utility will start.
GWhen [<<<Start menu>>>] is displayed, press the
Enter
key.
HThe approximate time required for erasing data will be displayed.
Press the
Space
key.
IAt the confirmation message, press the
Enter
key.
The operation of erasing the hard disk starts.
zIf necessary, the “hard disk data erase” operation can be cancelled
after it has begun by pressing the
Ctrl
+
C
key.
If the operation is cancelled before being completed, a part of data will
not be erased.
JThe message "Hard disk data has been deleted" will be displayed.
Remove the Product Recovery DVD-ROM, and press any key to shut
down the computer.
zIf a problem occurred during the operation, an error message will be
displayed.