Useful Feature
Eco Operation
In the eco operation mode, the unit automatically pauses when the air in the room is clean to save money on electricity. Furthermore, if this state continues more than 8 hours, the unit automatically stops operation. (In humidifying operations, the unit will not pause at a certain humidity level.)
Normal automatic operation |
|
When the air is clean, the unit continuously operates at | Silent |
“Silent” airflow. (In the strong deodorization mode, the | operation |
airflow rate is set to “Low”.) | Stop |
|
Eco operation | 10 minutes | 10 minutes | 10 minutes | |
When the air is clean and “Silent” operation continues | ||||
for 10 minutes or longer, the fan stops for about 50 | Silent |
|
|
|
minutes and the unit intermittently operates at “Silent” |
|
|
| |
airflow for about 10 minutes. | operation |
| 50 minutes | |
50 minutes | ||||
If this state continues more than 8 hours, the unit | Stop |
|
|
|
automatically stops operation. |
|
|
|
|
The degree of air contamination is detected by the odor sensor and dust sensor during eco operation. If the sensors detect odor or dust, the airflow rate switches according to the degree of air contamination. When the air becomes clearer and the unit runs for 10 consecutive minutes or longer at “Silent” airflow, the unit starts intermittent operation.
| “eco” indicator is lit. |
| ||
Press | button. | Pollen | Strong | Skin |
| Air Purify | Deodorization | Humidify Moisturize | |
| On | Max(Blinking) |
Auto |
| |
|
|
The mode is set to eco operation.
How to set/cancel
Every time you press | button, "Set" and |
"Cancel" will alternate.
The settings are stored.
Note
When using the air purifier together with the Hitachi air purifier with ionizing function
Pressing the 
button on the remote controller in front of the Hitachi air purifier with ionizing function (model whose
ionization setting / release is switched using the remote controller) sets and releases ionization. Furthermore, pressing the ionizing button on the remote controller of the model with the ionizing function sets and releases eco operation.
Dimmer Control
If you feel uncomfortable about indicator lightings when you go to sleep, press 
button on the purifier unit for 3 seconds or longer to dim the indicators.
Press 
button for 3 seconds or longer.
The indicators are dimmed.
How to set/cancel
Every time you press 
button, “Set” and “Cancel” will alternate.
The setting will be saved in memory.
Memory Function / Sensors / Auto Detection Useful Feature
