Preparations for Operation
CAUTION
Lay a soft cloth or the like beneath the purifier to protect the floor against scratch.
No cleaning effect is obtainable if the filter is installed with plastic bag. It may also be a cause of malfunction. Do not tip over or tilt the purifier.
Setting Filter in Purifier (Perform the same procedure when replacing filter.)
Remove the panel.
Place the unit on a level, stable surface.
Hold the panel at both sides, pull it gently forward and then slightly upward, and remove it.
Remove the
Disengage the tabs of the
Remove the filter.
(There are dust filter and deodorizing filter.)
Remove the filter packed in a plastic bag from inside the unit.
Take the filter out of a plastic bag.
Remove the packing. | Be sure to remove the packing. | |||
|
| |||
Install the Deodorizing filter. | The back |
| ||
(White) |
| |||
Install the deodorizing filter so that its black surface |
|
| ||
faces the front (white surface in the back). | front side(Black) |
| ||
Insert the filter all the way until the label |
|
| ||
(deodorizing filter position indicator) is hidden. |
|
| ||
Note | Be sure to take out the filter from a plastic bag. | Deodorizing filter | White | |
Do not block the filter front face with cloth or paper. | ||||
| (Black surface) | surface | ||
|
|
| ||
Same precautions should be taken for the dust filter as well.
Install the dust filter on the unit.
Insert the filter all the way until the label (dust filter position indicator) is hidden.
Install the
Dust filter
Reinstall the panel on the unit.
Insert the two tabs on top of the panel into the two holes on the unit.
Gently push bottom of the panel until it clicks to close it securely.
