Hitachi EP-A7000 Pre-filterGuide for cleaning Once a month, Clean the pre-filter

Pre-filter(Guide for cleaning: Once a month)

To clean the pre-filter, follow the steps below.

Remove the water tank, and then pull out the water tray. P.E-9

(This is to prevent water leakage.)

CAUTION	When you remove the tank, water may drip from the tank cap. Lay a dry cloth
	before removing the water tank.

Remove the panel. P.E-8

Remove the pre-filter.

Disengage the four tabs of the pre-fi lter.

Pre-filter tab insertion section

Clean the pre-filter.

Use a vacuum cleaner or the like to remove dust. If the dust
cannot be removed, wash off with water. After washing, fully	Vacuum
drain the pre-fi lter and then dry it in a well-ventilated place	cleaner
not exposed to sunlight.	attachment
When you wash, use a soft toothbrush or the like.	for
	cleaning
	shelves

If you want to remove dust on the Dust fi lter / deodorizing

filter, use a vacuum cleaner. The Dust fi lter / deodorizing fi lter is not washable.

Pre-filter

Dust filter

deodorizing filter

Reattach the pre-filter.

Insert the four tabs securely into the holes on the purifier and fi x the pre-fi lter.

Pre-filter tabs

Reattach the panel. P.E-8

Install the water tray, and then mount the water tank. P.E-9

The pre-filter is a consumable part.

When damaged pre-filter needs to be replaced, purchase the replacement part (Part No. EP-DV1000-002).

Cleaning

E-21