Using the Control on Purifier
Press
button.
Operation starts.
Every time you press 
button, the operation mode switches in the following sequence so that you can choose a desired mode or stop.
Air |
| Pollen |
| Strong |
| Humidify |
| Skin |
| Off | ||
Purify |
|
|
|
| ||||||||
| Deodorization |
|
| Moisturize |
|
| ||||||
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
The airflow rate is set to “Auto” by switching the operation mode.
Memory Function / Sensors / Auto Detection
Memory Function
When you stop the operation and then restart, the purifier will resume the operation status before shutdown. If you operate the purifier for approx. 5 seconds or longer, the operation status will be stored in memory. (If you stop the operation within less than 5 seconds, the operation status will not be stored in memory.) Even if you unplug the power cord, the operation status will be stored in memory. However, the airflow rate is automatically set to “Auto”.
Air Sensor
Level of air contamination detected by the odor sensor, dust sensor is shown by the way the indicator is activated.
Indicator action | : Lit in green | Blink in green | Skin | Air |
Contamination level: Clean | Contaminated | Moisturize | Timer(4hrs) Sensor | |
|
| |||
Note
Clean
Max(Blinking) Humidifying
You can adjust the air sensor, dust sensor sensitivity setting as desired. 
P.E-16
or in case the sensor itself is not clean, the indicator action may not change. 
P.E-25
Filter
Odor Sensor
The sensor detects odor in air such as cigarette smoke or odor of pet animals. |
|
Even when you feel the air is clean, the purifier may continue the operation if the |
|
odor sensor finds any gas component not removed by the filter. |
|
Any of the following may also be detected by the odor sensor. |
|
Combustion gas from heating appliance, alcohol, odor of perfumes or cosmetics |
|
used in beauty parlor or aesthetic salon, sprays, vapor, abrupt temperature | Odor sensor |
change, etc. |
