Clock Adjustment
Selecting the Clock Display
Press [DISP] (CLOCK) to change the display.
Radio mode display (default)
Clock display
The 12-hour system is used for the clock.
Initial Time
qPress [DISP] (CLOCK).
“Adj” is displayed when the clock is not adjusted.
wHold down [DISP] (CLOCK) for more than 2 seconds.
(Hour blinks)
eAdjust the hour.
[{TUNE], [}TUNE]
(Hours, Minutes)
(Hour set) Press [}]: sets the hour ahead. Press [{]: sets the hour back.
rPress [DISP] (CLOCK).
(Minute blinks)
tAdjust the minute.
(Minute set) Press [}]: sets the minute ahead. Press [{]: sets the minute back.
yPress [DISP] (CLOCK).
Time Reset
Hold down [DISP] (CLOCK) for more than 2 seconds to active the time setting mode to reset the time. Then, repeat steps e to y.
Note: Hold down [{] or [}] to change numbers rapidly.
(Completed)
10
