Panasonic CQ-5109U Channel direct selection mode, System control mode selection

SiriusXM Satellite Radio Control (continued)

[BAND]

[SEL]

Signal strength indicator Satellite Radio indicator

DISP [DISP]

[TUNE/SEEK }] (d)

[TUNE/SEEK {] (s)

System control mode selection

SiriusXM radio display

Press and hold [SEL] for more than 2 seconds to open SXM function setting screen.

SiriusXM function setting mode

Note: See below “Function settings” for its inside setting.

Turn [SEL] to open alarm time setting screen.

Alarm time setting mode

Note: Refer page 20 and follow its steps from 2 to 6 to set alarm time if needed.

Turn [SEL] back to SXM function setting screen.

Function settings

Channel direct selection mode

A channel is directly selected with the channel number entry.

1 Press and hold [SEL] for more than 2 sec- onds to open SXM function setting screen.

2 The radio automatically enters the SXM direct channel selection mode after 2 seconds when entering the SXM function setting screen.

Channel direct selection mode

3 Press [d] or [s] to select a number.

4 Press [BAND] to enter the next digit.

5 If necessary, repeat steps 3 and 4 to enter more digits of the channel number.

6 Press [SEL] when done entering the chan- nel number digits and the radio tunes to the desired channel.

Notes:

¡”CH UNAVL” is displayed when the requested channel is not valid. Visit www.siriusxm.com to see the list of channels available.

¡”CH UNSUB” is displayed when the requested channel is not part of the current subscription package. Visit www.siriusxm.com for information on subscription packages.

18