Panasonic CQ-C500U warranty Audio Setting

±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)

±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)

±12 dB (at 8 kHz, 10 kHz, 12 kHz, 15 kHz)

Audio Setting

Adjustment to each speaker and an optional subwoofer

1 Press [VOL] (PUSH SEL: Select) to open the menu.

2 Press [VOL] (PUSH SEL: Select) to select a mode to be adjusted.

3 Turn [VOL] clockwise or counterclockwise to adjust.

	Notes:
	• The sequence and contents of setting items may
	depend on the conditions of devices to be connected.
	For further information, refer to the System Upgrade
	Guidebook or the instruction manuals for the devices
	to be connected.
	• To return to the regular mode, press [DISP].
Display	• If no operation takes place for more than 5 seconds
	in audio setting (2 seconds in the volume adjustment,
	10 seconds in the SQ adjustment), the display returns
	to the regular mode.
	• The volume can also be adjusted directly using [VOL]
Menu	on the main unit. ( page 12)
	• Please refer to page 13 for calling up a preset SQ.
Audio	Volume Adjustment
	(Setting range: 0 to 40,
		Default: 18)
	1: Up
	2: Down

Bass Adjustment

(Setting range: 12 dB to 12 dB, 2 dB Step, Default: Bass 0 dB)

1: Up

2: Down

Treble Adjustment

(Setting range: 12 dB to 12 dB, 2 dB Step, Default: Treble 0 dB)

1: Up

2: Down

Note: Do not activate SQ and Bass/Treble at the same time to avoid causing sound distortion.

SQ Adjustment

( page 13)

(Adjustable range: 12 dB to 12 dB (by 2 dB)) Setting range:

SQ Low/Bass:

SQ Mid:

SQ High/Treble:

Balance Adjustment

(Setting range: L (left) 15 to R (right) 15 and Center,

Default: Center)

1: Right enhanced

2: Left enhanced

Fader Adjustment

(Setting range: R (rear) 15 to F (front) 15 and Center,

Default: Center)

1: Front enhanced

2: Rear enhanced

Subwoofer Level Adjustment

(Setting range : mute (), 6 dB to 6 dB, 2 dB

Step, Default: 0 dB)

1: Up

2: Down

Subwoofer Low Pass Filter

(Setting range: 80 Hz, 120 Hz, Default: 80 Hz)

1: 120 Hz

2: 80 Hz

Re-master Setting

High-range signal lost through MP3/WMA/AAC compression is reproduced to more closely recreate the pre-compression sound.

(Setting range: On/Off, Default: On)

1: On

2: Off

Notes:

•At high bit rates, the Re-master function may have little effect.

•It is only effective for playback of MP3/WMA/AAC data.

22CQ-C500U