Panasonic CQ-C500U warranty SQ Adjustment, General, Sound Control, SQ Changeover

Sound Control

SQ (Sound Quality)

SQ Selection Based on Genre

SQ Adjustment

You have 6 preset modes (FLAT, ROCK, POP, VOCAL,
JAZZ, CLUB). You can customize your settings for these
and save them for instant recall.		(FLAT) flat frequency response:
SQ Changeover		does not emphasize any part. (Default)
1Press [SQ] to activate the SQ selection mode.
2Press [SQ] to select the sound type as follows.		(ROCK) speedy and heavy sound:
Press [DISP] to return to the regular mode.		exaggerates bass and treble.
Notes:		(POP) wide-ranged and deep sound:
• After pressing [SQ] on the main unit, you can also
select a sound type by pressing the preset buttons [1]		slightly emphasizes bass and treble.
to [6].
• Please refer to page 22 for the adjustment to each
speaker and an optional subwoofer.		(VOCAL) clear sound:
· Bass adjustment
		emphasizes middle tone and slightly
· Treble adjustment
		emphasizes treble.
· Balance adjustment
· Fader adjustment
· Subwoofer level adjustment		(JAZZ) jazz-specific deep sound:
· Subwoofer low pass filter
· Re-master setting		sound with emphasis on sharpness of high-
		hat and echo saxophone.
		(CLUB) club and disco-specific sound:
		reproduction of realism being in a club.
You can adjust the characteristics of the currently		1 Press [VOL] (PUSH SEL:
selected sound type (SQ). ( above)
		Select) to open the menu.
It is also possible to preset up to 5 different adjusted
SQs.		2 Press [VOL] (PUSH SEL: Select) to
SQ3 (3-Band Sound Quality)		select a mode to be adjusted.
Center frequency and level are adjustable in each of		3 Adjust each band.
3 bands. This lets you fine-tune sound quality for each		1/2: center frequency up/down
genre to suit car-interior acoustics and your personal		[] []: Band selection
preferences.		[] []: Level up/down
Tone/SQ adjustable range: 12 dB to 12 dB (by 2 dB)		Band
SQ Low/Bass:	±12 dB (at 60 Hz, 80 Hz, 100 Hz,
		Level
	200 Hz)
		Frequency
SQ Mid:	±12 dB (at 500 Hz, 1 kHz, 2 kHz,
	3 kHz)	4 Hold down the numeric button [2] to [6]
SQ High/Treble: ±12 dB (at 8 kHz, 10 kHz, 12 kHz,
	15 kHz)	for 2 sec. or more.

• The bass/treble control level of each frequency is fixed	• The adjusted SQ is preset in the number of the selected
to the frequency that has been selected for SQ.	button, and return to the regular mode resumes.
	• When you suspend the SQ preset adjustment, each level
To return an adjusted SQ to the default setting	remains your recent adjustment until a new SQ presetting
1Press [SQ], and select the SQ which is to be returned	operation is performed or you call up the SQ preset.
to the default setting. (Only for main unit)	Notes:
2Hold down [BAND] for 2 sec. or more.	• You cannot save any SQ presetting value in [1] button.
	• Any SQ adjustments will not change the call up screen
	names such as ROCK and JAZZ.
	• Do not activate SQ and Bass/Treble at the same time to
	avoid causing sound distortion.

English

General, Sound Control

CQ-C500U13