Panasonic CQ-C7105U operating instructions IPod Control, File Selection Pause

iPod Control

Connection of the optional direct cable for iPod (CA-DC300U) allows users to operate the iPod including file selection and file sequence change with the buttons on this unit.

	1 Connect the iPod.
	2 Press [SOURCE] to select the iPod
Flow	mode. Playback starts.
	Note: If playback does not start, press [BAND]
Operation	(y / 5).	Press [BAND] (y / 5).
	[7]: Next file
	3 Select a desired portion.
	File Selection	Pause
	[6]: Beginning of the current file	Press again to cancel.
	For the previous file, press twice.
	Note: Hold down for fast forward/reverse.
	The type with which playback data is classified is
	selectable.
	1 Press [}] (LIST) to call up the play
	mode selection screen.
selection	2 Turn [VOL] to select the play mode.	For using the remote control, use [BAND] (SET).
	For using the remote control, use [}] or [{].
	: Playback by playlist	5 Press [PUSH SEL] to determine the
	: Playback by artist
	: Playback by album	selection.
Mode	Note: When the []] button is pressed, the regular	Note: Files without an album name or an artist
		name are not playable in the playing mode of the
	screen appears.
		album or artist display respectively.
	3 Press [PUSH SEL] to determine the
Playing
	selection.
	For using the remote control, use [BAND] (SET).

4 Turn [VOL] to select the portion to play.

Notes:

¡For selecting ARTIST, the ALBUM selection screen appears after selecting an artist name.

¡When the []] button is pressed, the previous

	screen appears.
	Current file				Time
Display	iPod number				lights when the direct cable
	(iPod 1)				for iPod (CA-DC300U) is
					connected.
Mode	(iPod 2)				*Even when the iPod itself
					is not connected, this
					indicator will also light.
					This indicates that the main
iPod		Play Mode indicators
		lights when each mode is activated.			unit normally operates.
			(Random)	(Album Random)
			(Repeat)

12CQ-C7205U/C7105U