Panasonic CQ-C7105U operating instructions Sirius Satellite Radio Receiver

Sirius Satellite Radio Receiver (continued)

	1 Press [SOURCE] to select the Sirius
	Satellite Radio mode.
	2 Press [BAND] to select a band.
Flow
	Notes:
Operation
	3 Select a channel.
	¡ “– – – –” is displayed when there is no information.
	¡ “UPDATING” is displayed when channel informa-
	tion is updated.

Channel selection

		[]] (TUNE): Preceding channel
		[[] (TUNE): Next channel
		Note: When you select a locked channel, hold down
		[#] on the remote control for 2 sec. or more. PASS-
		CODE entering display will appear.
	Up to 6 channels can be preset in SR1 to SR3
	respectively.
	Preset channels can be simply called up by pressing
ChannelPreset SET:-(PPRESET)	[}] (P-SET) or [{] (P-SET).
	3 Turn [VOL] to select a preset number.
	Note: Direct selection can be executed with [1] to [6]
	buttons on remote control.
	1 Tune into a channel.
	2 Hold down [}] or [{] for 2 sec. or
		more.
	4 Hold down [PUSH SEL] for 2 sec. or
		more, and the channel is written on the
		selected preset number.
	You can toggle the category on and off every time you
Category	hold down [BAND] for 2 sec. or more. If the category is
	set to on, the unit operates as follows for each button:
		Channel selection
by		[]] (TUNE): Preceding channel in current category
		[[] (TUNE): Next channel in current category
Selection
		[}] (P-SET: Preset): Next category
		Category selection
		[{] (P-SET: Preset): Preceding category

Preset channel selection

[{] (P-SET: Preset): Lower preset channel

[}] (P-SET: Preset): Higher preset channel

Notes:

¡Direct selection can be executed with [1] to [6] buttons on remote control.

¡A preset station is selectable by turning [VOL] and pressing [PUSH SEL] while the preset list screen is present on the monitor.

¡The volume is not adjustable while the preset list screen is present on the monitor.

Preset number/channel number blinks once.

Notes:

¡In step 2, a channel can be registered by holding down the numeric button [1] to [6] for 2 sec. or more.

¡To stop presetting channels, press [DISP] (DISPLAY).

¡The operation above allows users to replace the cur- rent channel with the channel preset in the selected number while selecting a preset channel.

lights when activated.

18CQ-C7205U/C7105U