Panasonic CQ-C7105U operating instructions Station Preset, Radio Menu Display

(APM: AUTO PRESET MEMORY, P·SET: PRESET)

Station Preset

Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively.

Preset stations can be simply called up by pressing [}] (P-SET) or [{] (P-SET).

Notes:

¡Direct selection can be executed with [1] to [6] but- tons on remote control.

¡You can switch between 6 and 18 for FM presetting stations. (EACH BAND/ALL BAND)

¡Preset stations are changeable. (Preset Swap)

Auto Preset Memory (APM)

Stations with good receiving conditions automatically preset.

1 Select a band.

2 Hold down [BAND] (APM) for 2 sec. or more.

The preset stations under best receiving conditions are received for 5 sec. each after presetting the sta- tions (SCAN). To stop scanning, press [}] or [{].

Note: New stations overwrite existing saved stations.

Manual station preset

1 Tune in to a station.

2 Hold down [}] or [{] for 2 sec. or more.

3 Turn [VOL] to select a preset number.

4 Hold down [PUSH SEL] for 2 sec. or more, and the frequency is stored at the selected preset number.

Notes:

¡In step 2, a station can be registered by holding down the numeric button [1] to [6] for 2 sec. or more.

¡To stop presetting stations, press [DISP] (DISPLAY).

¡The operation above allows users to replace the cur- rent station with the station preset in the selected number while selecting a preset station. (Preset Swap)

English

Radio Menu Display

1 Press [MENU] to display the menu dis-	3 Press [MENU] to close the menu	Radio
play.	screen.
For using the remote	For using the remote control, hold down [SEL]
control, hold down	(MENU) for 2 sec. or more.
[SEL] (MENU) for 2	PRESET
sec. or more.
	Preset range for FM bands
	: Individual setting for FM1-3 each
	(default)
	: Setting of FM1-3 together

2 Press [PUSH SEL] to adjust.

For using the remote control, use [BAND] (SET).

CQ-C7205U/C7105U21