1 Press [SOURCE] to select the XM Satellite Radio mode.
2 Press [BAND] to select a band.
Flow |
|
|
|
Notes: | |||
Operation | ¡ Connect the optional XM receiver | ||
| |||
| ¡ To connect the XM receiver | ||
| required to use an optional extension cord that is | ||
| produced by XM exclusively for Panasonic prod- | ||
| ucts. | ||
| ¡ “RADIO ID” is displayed with channel 0. | ||
| ¡ “UPDATING” is displayed during the update of the | ||
| identification code. | ||
| ¡ “LOADING” is displayed during the acquisition of | ||
| audio data or information. | ||
ReceiverXM DisplayMode | Preset Number | |
Band | ||
| ||
| Artist name/Song title |
Up to 6 channels can be preset in XM1 to XM3 respectively.
Preset channels can be simply called up by pressing [}]
Note: Direct selection can be executed with [1] to [6] buttons on remote control.
PresetChannel | 1 Tune into a channel. |
| 2 Hold down [}] or [{] for 2 sec. or |
| more. |
| 3 Turn [VOL] to select a preset number. |
English
3 Select a channel.
Channel selection
[]] (TUNE): Preceding channel
[[] (TUNE): Next channel
Preset channel selection
[{]
[}]
Notes:
¡ Direct selection can be executed with [1] to [6] buttons on remote control.
¡ A preset station is selectable by turning [VOL] and pressing [PUSH SEL] while the preset list screen is present on the monitor.
¡ The volume is not adjustable while the preset list
screen is present on the monitor.Receiver Channel number/name
XM
indicates the satellite receiver is ready.
4 Hold down [PUSH SEL] for 2 sec. or more, and the channel is written on the selected preset number.
Preset number/channel number blinks once.
Notes:
¡In step 2, a channel can be registered by holding down the numeric button [1] to [6] for 2 sec. or more.
¡To stop presetting channels, press [DISP: DISPLAY].
¡The operation above allows users to replace the cur- rent channel with the channel preset in the selected number while selecting a preset channel.
¡The channel may be different between when the chan- nel is preset and when the channel is called up because channel preset is performed using Service ID.
