Ground Lead
To a clean, bare metallic part of the car chassis
Battery Lead
To the car battery, continuous +12V DC
A5
(Dark blue)
A (Black)
ACC
Resistor(1kΩ)
BATTERY 15A
Fuse(15A)
Cautions:
¡Check the connectors provided on your car (see note on page 4 and 5) before connecting the system.
¡This unit is designed for use in a car having a
¡To prevent damage to the unit, be sure to follow the connection diagram.
¡Strip about 5 mm of the lead ends for connection (only non- ISO connector cords).
¡Do not insert the power connector into the unit until the wiring is completed.
¡Be sure to insulate any exposed wires to prevent short circuit- ing with the car chassis. Bundle all cables, and prevent cable terminals from touching any metal parts.
¡This unit can be connected to an optional CD changer (CX- DP9061/DP9060EN,
¡For details consult your nearest authorized Panasonic Dealer. ¡For connection to a CD changer, refer to the operating instruc-
tions of the CD changer
C1 : (Orange)
Telephone Mute Lead (*)
Connect to the car telephone mute lead.
Note: The telephone mute lead is only for connection to the radio mute lead. Output other than telephone will not be muted
Navi Mute Lead (**)
To the Navi Mute lead of the Panasonic car navigation system.
*Telephone Mute
The sound from the speakers cannot be heard while the tele- phone conversation is in progress.
**Navi Mute
The sound from the speakers cannot be heard while the naviga- tion guide is on.
A8 : Ground Lead (Black)
To a clean, bare metallic part of the car chassis
A7 : Power Lead (ACC or IGN) (Red)
To ACC power, +12V DC
A4 : Battery Lead (Yellow)
To the car battery, continuous +12 V DC
A5 : (Dark blue)
Motor Antenna Relay Control Lead
(To Motor Antenna) (Max. 500mA)
This lead is not intended for use with a switch actuated power antenna.
Amp·Relay Control Power Lead
This lead is for connection to a Panasonic power amplifier.
E
N
G
L
I
S
H
16
21
