| Installation |
| ||
NE |
|
| ||
G |
|
|
|
|
|
|
|
| |
L |
|
|
|
|
I |
|
|
|
|
Preparation |
| ¡We strongly recommend that you wear gloves | ||
S |
|
| ||
H |
|
|
| for installation work to protect yourself from |
|
| |||
11 |
| ¡Before installation, check the radio operation with antenna and | injuries. | |
| speakers. |
| ||
|
|
| ||
|
| ¡Disconnect the cable from the negative |
| |
|
| (see caution below). | First complete the electrical connections, and then | |
|
| ¡Unit should be installed in a horizontal position with the front | check them for correctness.(a Page 20) | |
|
| end up at a convenient angle, but not more than 30°. |
|
30° or less
Caution: Do not disconnect the battery terminals of a car with trip or navigational computer since all user settings
stored in memory will be lost. Instead take extra care withLock Lever (C) installing the unit to prevent shorts.
Power Connector e
Dashboard Installation
Installation Opening
The unit can be installed in any dashboard having an opening as shown at right.
The dashboard should be
4.5 mm - 6 mm thick in order to be able to support the unit.
Installation Precautions
This product should be installed by a professional installer, if pos- sible.
In case of difficulty, please consult your nearest authorized Panasonic Service Center.
1.This system is to be used only in a
2.Follow the electrical connections carefully (a Page 20). Failure to do so may result in damage to the unit.
3.Connect the power lead (red) after all other connections are made.
4.Be sure to connect the battery lead (yellow) to the positive ter- minal (+) of the battery or fuse block (BAT) terminal.
5.Insulate all exposed wires to prevent short circuiting.
6.Secure all loose wires after installing the unit.
7.Please carefully read the operating and installation instructions of the respective equipment before connecting it to this unit.
16