E N G L
Installation (continued)
I
S
H
13
To Remove the Unit | Open |
q Remove the removable face plate. |
|
(a) Open the face plate. |
|
| OPEN |
| MONO/LOC |
| PTY |
| PWR |
| SOURCE |
(b)Push the face plate to either the right or left, then pull it out toward you.
w Remove the trim plate t with a screwdriver.
e Pull out the unit while pushing down the lock lever with a screwdriver.
r Remove the unit pulling with both hands.
| Contact |
q Open | w Push |
| e Pull out |
| tTrim Plate |
Screwdriver |
1 |
2 |
Lock Lever |
Screwdriver |
Cautions:
¡Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts. ¡If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
¡Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or it might be damaged.
18
