Panasonic CS-C18PKF-3 Cleaning instructions, Indoor unit, Nanoe-G Generator, Air filters

Cleaning instructions

To ensure optimal performance of the unit, cleaning has to be carried out at regular intervals. Please consult authorised dealer.

•Switch off the power supply and unplug before cleaning.

•Do not touch the aluminium fin, sharp parts may cause injury.

•Do not use benzine, thinner or scouring powder.

•Use only soap ( pH 7) or neutral household detergent.

•Do not use water hotter than 40 °C.

Indoor unit
Front panel	Aluminium fin

Human activity		nanoe-G
sensor	Air filters	Generator

Indoor unit

Wipe the unit gently with a soft, dry cloth.

Human activity sensor

Do not hit or violently press or poke it with a sharp object. This can lead to damage and malfunction.

nanoe-G Generator

Every 6 months

• Clean with dry cotton bud.

• Do not touch during operation.

Air filters

Every 2 weeks

Front panel

Wash gently and dry.

Remove the front panel

2 Pull out

1 Raise

Close it securely

3Press both ends of the front panel

1Insert at both sides

• Wash/rinse the filters gently with water to avoid damage to the filter surface.

•Dry the filters thoroughly under shade, away from fire or direct sunlight.

•Replace any damaged filters.

Remove air filter	Attach air filter
	Insert into the unit

For seasonal inspection after extended non-use

•Checking of remote control batteries.

•No obstruction at air inlet and air outlet vents.

•After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents:

COOL: ≥ 8 °C

For extended non-use

2 Close down

4For CS-C18PKF-3, CS-C24PKF-3: Press at center of the front panel.

•Activate nanoe-G operation for 2~3 hours as an alternative to remove moisture left in the internal parts thoroughly to prevent mould growth.

•Turn off the power supply and unplug.

•Remove the remote control batteries.

10