How to use
ECONAVI
To optimise energy saving
ECONAVI
MODE
To select operation mode
AUTO - For your convenience
•Unit selects the operation mode according to the room temperature.
•Once AUTO mode is selected, the unit will operate at the standard setting temperature.
Room | Operation mode | Standard setting |
temperature |
| temperature |
23˚C & above | COOL | 25˚C |
Below 23˚C | DRY | 22˚C |
•Press 
for “HI” to +2˚C or 
for “LO” to
COOL - To enjoy cool air
Human activity sensor and indicator
Sunlight sensor and remote control receiver
Remote control display
AUTO | FAN |
COOL | SPEED |
DRY
AIR 
SWING
POWER/AVS
TIMER
ECONAVI
AUTO COMFORT
POWERFUL/QUIET
Indicator (Orange/Green) (Orange) (Green) (Green)
(Blue)
(Orange/Green)
•To reduce power consumption during COOL mode, use curtains to screen off sunlight and outdoor heat.
DRY - To dehumidify the environment
•Unit operates at low fan speed to give a gentle cooling operation.
POWERFUL/ To switch between
QUIET
powerful & quiet
POWERFUL 
QUIET 
NORMAL
POWERFUL: To reach temperature quickly
POWERFUL
•This operation will stop automatically after 15 minutes.
ECONAVI | OFF/ON | AUTO |
| COMFORT | |
MODE |
| |
| TEMP |
|
POWERFUL/ | AIR SWING | |
QUIET | FAN SPEED | |
TIMER |
|
|
ON |
| SET |
1 | 2 | 3 |
OFFCANCEL
SET CLOCK RESET
Press and hold for approximately
10 seconds to show temperature setting in °C or °F.
Press to restore the remote control to default setting.
Not used in normal operations.
QUIET: To enjoy quiet operation
QUIET
• This operation reduces airflow noise.
Auto OFF/ON button
FAN SPEED
To select fan speed
(Remote control display)
•For AUTO, the indoor fan speed is automatically adjusted according to the operation mode.
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
•To use in AUTO mode, press the button once.
•To use in COOL mode, press and hold the button until 1 beep is heard, then release.
•Press the button again to turn off.
6
