Panasonic CY-VHD9500U Error Display Messages, DVD video/Video CD/CD/MP3, Display settings

E

N

G

L

I

S

H

47

Troubleshooting (continued)							E
							G
							N
							L
							I
VCR, Camcorder, etc.							S
				Error Display Messages
							H
Problem	Possible cause	Possible solution	DVD video/Video CD/CD/MP3				48
The picture from a	A VCR or Camcorder is not	Connect a VCR or Camcorder correctly.		Display	Possible cause	Possible solution
VCR or a camcorder is	connected correctly.				Disc is dirty, scratched or upside	Check the disc.
not displayed.
Display settings				Playback Error	down.
					A CD that has data other than	Check the disc.
Problem	Possible cause	Possible solution
				Please eject.	CD-DA or MP3 type is loaded.
The picture is dark.	The screen is not adjusted	Make every adjustment of the screen.
The picture is whitish.	properly.				An attempt was made to play a PAL	Eject the disc.
Something is wrong					disc.
with the picture.
The picture is light in					Disc is dirty, scratched or upside	Check the disc.
color.
					down.
Red, blue, or green	This is a characteristic of liquid	This is not a problem (page 10).
					A CD that has data other than	Check the disc.
spots appears.	crystal panels.				CD-DA or MP3 type is loaded.
				This type of disc
					An attempt was made to play a PAL	Eject the disc.
				cannot be played.
Remote Control Unit					disc.
				Please eject.
Problem	Possible cause	Possible solution			The unit for some reason cannot	Select a file that the unit can read.
					read the file you are trying to play.	Confirm the type of data recorded
No response to	The battery is inserted in the	Insert a correct battery in the correct			(File recorded in an unsupported	on the disc. Create a new disc if
pressing buttons	wrong direction. A wrong battery is	direction.			file system, compression scheme,	necessary.
	inserted.				data format, file name extension,
					damaged data, etc.)
	The lithium battery is weak.	Replace the battery with new one.
	The aiming direction of the remote	Aim the remote control unit at the			The unit will not operate for some	Eject the disc. If the disc does not
	control unit is wrong.	sensor of the unit and press buttons.
				Mechanical Error	reason.	eject when you press [<], then press
	The sensor is exposed to direct	Block off sunlight to the sensor.				the reset switch (page 92). If normal
	sunlight. (The remote control			Please eject.		operation is not restored, call the store
	unit may not be operable when					where you purchased the unit or the
	the sensor is exposed to direct					nearest Panasonic Servicenter.
	sunlight. In such a case, the
	system is not faulty.)			This disc may not	An attempt was made to play a disc	Eject the disc.
					with a region number that was not
				be played in your
					“1” or “ALL”.
				region.
				Please eject.

90 CY-VHD9500U CY-VHD9500U 91