3. Outing Function (Continued)
• Setting the Outing Function
1．Press and hold 
for more than 4 seconds to display the upper limit temperature setting screen.
, 
and the upper limit temperature start flashing. (The default value of the upper limit temperature is 38 °C.)
2．Press 
/ 
to select the upper limit temperature, and press 
to fix the value. The lower limit temperature setting screen is displayed.
3．Press 
/ 
to select the lower limit temperature, and press 
to
fix the value. The outing function setting is completed. (The default value of the lower limit temperature is 10 °C.)
*The unit returns to the normal mode if 
is pressed or there is no operation made for 3 minutes during the setting. In this case, all the settings in progress will be lost.
• Canceling the outing function
Press and hold
for more than 4 seconds while the outing function is set.
2
3 EN
• Outing function indication
Outing function | Status |
indication |
|
Off | The outing function is not set. |
Flashing | The outing function is now being set, or under operation. |
Lighting | Although the outing function is set, not under operation. |
|
|
Note
If a blackout occurs during outing function operation and power is cut, the remote controller will lose
the information for outing function operation. It reverts from the blackout, and an air conditioner does not drive in outing function when operation is started. At this time, an air conditioner does not stop at outing function.
