5
Getting Started
This chapter describes preparations and other items you must be aware of before starting operation.
Prepare your PS for use as follows:
• Install the battery pack.
• Charge your PS.
These preparations are described in detail below.

1. Installing the battery pack

The PS is operated by voltage supplied from the battery pack. Follow the procedure below to install
the battery pack.
(1) Slide the battery cover in the direction of the arrow to remove it.
(2) Securely insert the battery pack connector into the connector in the PS.
(3) Install the battery pack.
Notes:
Press the battery pack cord into the slot in the side of the battery pack. If you do not do so, you
may not be able to replace the cover.
IMPORTANT
• If the PS is not used more than two weeks, please put off the battery pack
to keep the battery life and recharge it before using the PS again.