Advanced (Playback)

[PROTECT]You can set protection for pictures you do not want to be deleted by mistake. Select [PROTECT] on the [PLAYBACK] Mode menu. (P21)

Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].

[SINGLE] [MULTI]

Select the picture, and then press [MENU/SET].

When [MULTI] has been selected

Repeat these steps for each picture.

The settings are canceled when [MENU/ SET] is pressed again.

Press 2/1 to select the picture.

Press 3/4/2/1 to select the pictures.

Press [] to return to the menu screen.

Press [MENU/SET] to close the menu.

Canceling all the [PROTECT] settings

1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].

2Press 3 to select [YES] and then press [MENU/SET].

3Press [MENU/SET] to close the menu.

If you press [MENU/SET] while canceling protection, the canceling will stop halfway.

Note

The protect setting may not be effective on other equipment.

Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in memory or the card is formatted.

Even if you do not protect pictures on an SD Memory Card or an SDHC Memory Card, they cannot be deleted when the card’s Write-Protect switch is set to [LOCK].

- 124 -