Connecting to other equipment

Disconnecting the USB connection cable safely

Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the digital camera before removing the hardware.

Note

Turn the camera off before connecting or disconnecting the AC adaptor (optional).

Before inserting or removing a card, turn the camera off and disconnect the USB connection cable. Otherwise, data may be destroyed.

Viewing the contents of the built-in memory or card using the PC (folder composition)

1 Folder number2File number

3

JPG:Pictures

 

MOV:Motion pictures
MISC:

 

DPOF print

 

 

Favorite
A new folder is created when pictures are taken in the following situations.

After [NO.RESET] (P27) in the [SETUP] menu has been executed

When a card containing a folder with the same folder number has been inserted (Such as when pictures were taken using another make of camera)

When there is a picture with file number 999 inside the folder

Connection in the PTP Mode (WindowsR XP, Windows VistaR and Mac OS X only) Set [USB MODE] to [PictBridge(PTP)].

Data can now be read only from the card into the PC.

When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP Mode.

- 130 -